Dry-O-Lite®

Dry-O-Lite is the registered trade name of the absorbent deliquescent desiccant specifically formulated for single tower compressed air dryers. Materials in the compound are not toxic or potentially toxic and are completely soluble. When used in a properly sized single tower air dryer, Dry-O-Lite will remove sufficient moisture vapor to establish an approximate 55% RH in the air line.

Special Purpose - SP

Special Purpose, Type SP, is the trade name of the absorbent deliquescent desiccant formulated for compressed air dehydration where the operating temperature is at or below 80° F. Special Purpose absorbent desiccant produces lower dew points for compressed air applications than other absorbent deliquescent desiccants on the market. It establishes an approximate 33% RH in the air line.

High Performance - HPD

High Performance, Type HPD, absorbent deliquescent desiccant is recommended for sequential tower systems where the operating temperature is at or below 80° F. When used in a properly sized compressed air dryer, HPD will remove sufficient moisture vapor to establish an approximate 23% RH in the air line.

Max Performance - 10BF

Max Performance, Type 10BF, is the most powerful absorbent deliquescent desiccant developed by Van Air Systems for use in single tower compressed air dryers. Extremely low dew point requirements in compressed air dehydration systems can usually be met using 10BF. When used in a properly sized single tower air dryer, 10BF will remove sufficient moisture to establish an approximate 10% RH in the air line.