Our Mist Eliminator is a special purpose coalescing filter to handle large amounts of oil with minimal pressure drop in the air line. The housing of the Mist Eliminator is ASME coded and coated with white enamel to prevent chipping, cracking, and corrosion. We are so confident about the quality of our product that a five year warranty comes standard on all of our Mist Eliminator housings.

Like the housing, the coalescing filter element used with our Mist Eliminator is built to last. Designed to handle large amounts of oil within the air stream, the filter element is constructed of a thick bed of glass fibers that facilitates self-cleaning and continuous draining. This ensures longer element life than that of pleated or borosilicate glass coalescing filters. On average, the filter element only needs to be replaced every ten years and carries a ten year prorated warranty. Throughout the operating life of the filter element, pressure differential is 1 PSID or less.

If you would like to place an order or have any questions on how our Mist Eliminators can aid in protecting your downstream equipment do not hesitate to contact our knowledgeable staff at 1-800-840-9906 or Email Us.

Using the Flow Capacities chart below, select your lowest operating pressure at the point of installation and read down that column to the nearest flow that meets or exceeds your requirements. Follow along the row to the left side of the chart to determine the proper model number.

For inlets other than 100° F, multiply your required capacity by the applicable correction factor to the left.

• Maximum capacities based on 100 psig and 100° F inlet temperature.
• MWP = 150 psig at 100° F; maximum inlet temperature = 300° F.
• For high pressure applications, Contact Us.

¹ Flanges are ANSI Class 150# R.F.
² Electronic or demand drain recommended.
³ Weight includes element.
• Due to continuous improvement, dimensions and specifications may change without notice.
• Request certified drawing before pre-piping.