Compressed Air & Natural Gas Filters

compressed air dryer with a filter
Contaminants take many forms in compressed air and gas systems. Small particles of atmospheric dust not removed by compressor intake filters are concentrated during compression. Pipe scale forms over time by the interior rusting of air lines. Dirt and debris can enter gas lines from the well. Hot running lubricated compressors introduce hydrocarbons when lubricants break down. Over time these contaminants will wear out seals, damage sensitive instruments and pneumatic tools, foul heat exchangers & desiccant beds, and cause costly downtime. Put Van Air Systems filters and elements to work and see the difference that clean, trouble free air and gas make in your system.

compressed air dryer with filter

Particulate & Coalescing Filters, and Other Components

air and gas filter components
air and gas filter components
Van Air Systems offers a wide range of filter housing designs to match the flow, pressure, and performance requirements of virtually any application. All filters are cast aluminum and ASME coded in a variety of element grades and flows. Van Air F200 cast filters are built for flows from 15cfm through 1600cfm. A Lifetime warranty accompanies this line and ensures that bowls and heads of these products provide unrivaled protection. Van Air also offers its F101 ASME coded filter line for both air and gas and are built for flows from 500cfm through 5000cfm. Both lines are built for longevity and unlike most competitors, Van Air ensures that their corresponding elements will not crush, fall apart and migrate downstream.

Air Filters

F200 Series

Van Air Systems’ F200 series coalescing and particulate filters are designed to remove contaminants from compressed air systems. Available in ¼” to 3″ NPT connection sizes and flow capacities from 15 to 1200 scfm at 100 psig in 15 housings and 9 filtration grades, the F200 series removes oil aerosols, oil vapors, condensed water, and particulates. F200 housings are made of cast aluminum and coated with an epoxy powder coating for corrosion resistance. All units include push-on elements with a durable polyester drain layer. Accessories include differential pressure indicators, wall mounting kits, connector kits and automatic drain valves.

F200 Series
Air Filters

F101 Series

Van Air Systems’ F101 series coalescing and particulate filters are designed to remove contaminants from compressed air systems. Available in 2″ NPT to 6″ flange connection sizes and flow capacities up to 5000 scfm at 100 psig in 6 housings and 10 filtration grades, the F101 series removes oil aerosols, oil vapors, condensed water, and particulates. Housings are constructed of welded steel, built and stamped in accordance with the ASME code. Accessories include differential pressure indicators and automatic drain valves.

F101 Series
Gas Filters

GF200 Series

Van Air Systems’ GF200 series coalescing and particulate filters are designed to remove contaminants from natural gas systems. Available in ¼” to 3″ NPT connection sizes and flow capacities from 15 to 1600 scfm at 100 psig in 16 housings and 9 filtration grades, the GF200 series removes oil aerosols, oil vapors, condensed water, and particulates. GF200 housings are made of cast aluminum and coated with an epoxy powder coating for corrosion resistance. All units include push-on elements with a durable polyester drain layer. Accessories include differential pressure indicators, wall mounting kits, connector kits and automatic drain valves.

GF200 Series
Air Filters

Mist Eliminators

The Van Air Systems Mist Eliminator is a special purpose coalescing filter for removing large volumes of oil and oil aerosols with a pressure drop of 1 psid or less. Minimizing pressure drop translates directly to energy savings. With a thick bed of glass fiber, the Mist Eliminator element facilitates self-cleaning by continuous draining. Contaminants are trapped at various stages within the fiber bed, not only at the surface. This prevents clogging and keeps pressure drop low.

Mist Eliminators
Air Filters

Moisture Separator

Van Air’s Moisture Separators remove compressor lubricant, oil aerosols, and moisture from compressed Air Systems. These separators have flow capacities up to 800 SCFM at 100 psig and available in 1/2” through 3” connection sizes. The moisture separator housings are made of cast aluminum and they are coated for corrosion resistance. Each Moisture Separator requires no electricity and includes a push-on element cartridge and manual or automatic drain valve.

Moisture Separator
Air Filters, Gas Filters

Filter Elements

Rid your compressed air or gas system of harmful oil aerosols, oil vapors, dirt, and pipe scale with Van Air Systems filter elements. Van Air Systems is the original manufacturer of 10 grades of filter elements for particulate removal, oil aerosol coalescing, and vapor absorbing applications.

Filter Elements

Need a Product?